DIY Cooling Blanket: How to Make Your Own for a Cooler Night’s Sleep

Staying cool at night can be a challenge, especially during the warmer months. While purchasing a cooling blanket is an option, making your own DIY cooling blanket can be a fun and cost-effective alternative.

This guide will walk you through the process of creating a cooling blanket, explaining the materials you’ll need and the steps to follow.

How to Make a Cooling Blanket

Creating a DIY cooling blanket involves selecting the right materials and following a few simple steps. Here’s how you can make your own:

Materials Needed:

• Breathable Fabric: Cotton or bamboo fabric for the outer layer.
• Cooling Insert: Gel pads, cooling packs, or moisture-wicking material.
• Sewing Supplies: Needle, thread, and sewing machine (optional).
• Measuring Tools: Tape measure and fabric scissors.
• Velcro or Zippers (Optional): For easy insertion and removal of cooling inserts.

Step-by-Step Instructions:

Creating a cooling blanket might seem complex, but breaking it down into manageable steps makes it quite simple. Here’s an in-depth look at each step:

Measuring and Cutting Fabric

• Tools Needed: Fabric, tape measure, fabric scissors, chalk or fabric marker.
• Steps:
  • Lay your fabric out on a flat surface.
  • Measure your desired blanket size. For example, for a standard throw blanket, you might measure 50 inches by 60 inches.
  • Mark the measurements on the fabric using chalk or a fabric marker.
  • Cut two pieces of fabric to these dimensions, adding an extra inch to each side for seam allowance.

Preparing the Cooling Insert

• Cooling Inserts: Gel pads, cooling packs, or moisture-wicking material.
• Steps:
  • If using gel pads or cooling packs, arrange them in a single layer that will cover the entire blanket area. Ensure there are no gaps.
  • If using moisture-wicking material, cut it to the same size as your fabric pieces. This material will go between the two fabric layers.

Assembling the Layers

• Tools Needed: Pins, the fabric layers, cooling inserts.
• Steps:
  • Lay one fabric piece flat, right side up.
  • Place the cooling insert on top.
  • Place the second fabric piece on top, right side down, aligning all edges.
  • Pin the layers together along the edges.

Sewing the Edges

• Tools Needed: Sewing machine or needle and thread, pins.
• Steps:
  • Sew along the pinned edges, leaving a 6-inch gap on one side.
  • Backstitch at the beginning and end to secure the seams.

Turning and Finishing

• Tools Needed: Needle and thread, or sewing machine.
• Steps:
  • Turn the blanket right side out through the gap.
  • Push out the corners using a blunt tool, like a knitting needle or a pencil.
  • Tuck the raw edges of the gap inside and sew it closed with a blind stitch or a top stitch.

Optional Steps for Removable Inserts

• Tools Needed: Velcro strips or a zipper.
• Steps:
  • Sew Velcro strips or a zipper along one edge of the blanket before assembling the layers.
  • This allows you to open the blanket and remove the cooling insert for washing or replacement.

Using a Puffy Lux Mattress with your DIY cooling blanket can further enhance the cooling effect, providing a comfortable and supportive sleep surface.

One million Americans are sleeping better with Puffy. Compare our award-winning mattress collection against other brands to learn why: Puffy vs Purple, Puffy vs Nectar, Puffy vs Casper, Puffy vs Leesa, Puffy vs Saatva, Puffy vs Dreamcloud, and Puffy vs Tuft & Needle.

Benefits of a DIY Cooling Blanket

Making your own cooling blanket comes with several benefits:

• Cost-Effective: Often cheaper than purchasing a ready-made cooling blanket.
• Customization: Choose materials and sizes that suit your specific needs.
• Satisfaction: Enjoy the process and the satisfaction of using something you made yourself.

Additional Tips:

• Material Selection: Opt for high-quality, breathable fabrics for the best results.
• Maintenance: Follow care instructions to maintain the effectiveness of your cooling blanket.
• Pairing: Use with lightweight bedding to maximize the cooling effect.

Choosing the Right Materials for a Cooling Blanket

Selecting the right materials is crucial for the effectiveness of your DIY cooling blanket. Here are some options:

Breathable Fabrics:

• Cotton: Natural and breathable, making it a great choice for the outer layer.
• Bamboo: Known for its cooling properties and softness.

Cooling Inserts:

• Gel Pads: Provide a cooling effect and can be easily incorporated into the blanket.
• Cooling Packs: Reusable and effective for maintaining a cool temperature.
• Moisture-Wicking Material: Helps in drawing sweat away from the body, enhancing comfort.

Tips for Enhancing the Cooling Effect

Here are some tips to enhance the cooling effect of your DIY cooling blanket:

Layering:

• Use Lightweight Sheets: Combine your cooling blanket with lightweight sheets to prevent trapping heat.
• Avoid Heavy Covers: Heavy blankets can negate the cooling effect, so stick to lighter options.

Maintenance:

• Regular Cleaning: Keep your cooling blanket clean to maintain its cooling properties.
• Proper Storage: Store it in a cool, dry place when not in use to prevent damage to the cooling inserts.

I’ve always enjoyed DIY projects, and making a cooling blanket was no exception. Living in a warmer climate, staying cool at night can be challenging.

My homemade cooling blanket, combined with a Puffy Lux Mattress, has made a significant difference. The breathable fabric and cooling inserts keep me comfortable throughout the night, and the mattress provides the support I need for a restful sleep.

Conclusion

Creating your own DIY cooling blanket can be a fun and rewarding project that helps you stay cool during those hot nights. By selecting the right materials and following the steps outlined in this guide, you can make a cooling blanket that meets your needs.

Whether you’re looking to save money or simply enjoy a DIY project, making your own cooling blanket is a great option for a cooler night’s sleep.